Plans, projects and how-to's for home machinists

Made by Hand No 2 – The Knife Maker

This well made video is about Joel Bukiewicz, the owner of Cut Brooklyn, who started out wanting to be a writer but found he loves making things and being part of a community that makes things by hand.  Joel explains why, how he came to make knives for home and professional cooks and what it takes to get really good at something.

I enjoy videos like this and I’ve posted similar ones.  But for reasons I’m not sure I understand this one resonates with me much more than the others.  It might be because I also enjoy making things, but I make my living with computers so I don’t have anything tangible that I can see and hold at the end of my workday.

Wayne Grenning

When the Daimler Chrysler Corporation decided to make a reproduction of its first engine, one that was a pioneer in automobiles and the model for the modern engine, it commissioned three copies.  One was kept at the company’s headquarters, the other went to a collector in Michigan and the third to a museum.  Ironically, there was a problem with all three—Chrysler couldn’t get any of them to work.

That’s where Wayne Grenning came in.  He is a historic gas engine reproduction expert, having built a museum’s worth of them that he keeps at his Lockport, N.Y., home.  One of the Daimler models found its way to Pennsylvania, where it was displayed at the Coolspring Power Museum.  The museum’s director already knew Wayne well from the many reproductions he sent the museum, so he turned to Wayne  again to help fix the missing components and get the engine up and running.

The Daimler engine represented the culmination of the experimentation with internal combustion, but the original engine was lost in a factory fire in 1903, with only the blueprints surviving.  From those drawings two prototypes were made for advertising purposes, but the designers didn’t like the look of where the carburetor was so they moved it to look “more presentable.”  After spending months on the project with the help of two others, he had the engine up and running again

Between his website [Grenning Models and his YouTube page,] and his activity on forums, Grenning has provided extensive details for just about every major project he’s ever done in the past decade or so.

For readers who want a more in-depth look at how Wayne restored the engine, complete with photos of just about every step, he maintained a thread on the SmokStak Forum as he worked on the project.

History in Engine-making

It was a trip to the county fair at age 11 that first turned Wayne on to making model engines.  His friends wanted to sample the food and go on the carnival rides, but Wayne was more concerned with the impressive display of tractors and other equipment beyond the rides and games.  He started working on engines from there, building his first hit-or-miss engine in 9th grade.

“That was the beginning of my bug for machining, and I kept working on other projects after that,” he says.

It wasn’t until after he graduated college that Wayne decided to make it something more than a hobby.  He began actively making engines, and by the end of his 20s he was making his own casting kits to sell.  Today Wayne is a fixture on the model show circuit and bulletin boards like SmokStak.

When he started, machining was mostly a solitary endeavor, with little communication between participants.  He recalls that when someone had a question about a certain technique or project, their options were limited—they could ask the one or two other people they might know, usually a mentor, or if that person didn’t have an answer they could write to one of the few specialty magazines and hope for an answer in the forum within a few months.

Today, with the advent of the internet and the prevalence of forums dedicated to just about every type of machining, the world of machinists has grown more connected and knowledge shared much easier, Wayne says.

“If you’re John Q. Collector and you want to learn something but have never done it before, you could type a few sentences on a message board and get a whole bunch of replies,” he says.   “Before, when magazines were the only real way to connect with large groups of people, it took a lot longer and knowledge and tricks were slower to spread.”

The Internet has also brought about a large increase in the type of projects hobbyists can do and made it easier to buy materials, Wayne says.  Casting kits and projects in particularly have grown by “leaps and bounds” in the past 10 or 15 years, he adds.  Before the rise of the internet, most machining hobbyists read or earned about new projects from magazines, so they could see anywhere from 12 to 18 new projects over a year.  Today, with internet forums and web sites dedicated to all different aspects of machining, they have a trove of information available at just a click.

Favorite Projects Continue reading Wayne Grenning

Art Dick, Machinist

I really liked the video about Neil Youngberg that I posted a little while ago and I think many of you did too.  This one about Art Dick is similar because it shows another craftsman doing his job and it also has beautiful cinematography.  You almost can’t tell that it’s a commercial.  I recommend watching it full-screen in 720p HD if you can.

Neil Youngberg “PROFESSIONal”

I’m not going to try to describe what this video is about except to say you may enjoy it if you like working with metal or tools.  I recommend watching it in full-screen if you can.  The cinematography is beautiful.

Random Quote

Ye shall know the truth, and the truth shall make you mad.

— Aldous Huxley